TITAN - Small but Mighty, with Big Time Features
Efficient Innovation
Save thousands in maintenance fees and time lost with the Titan AAA and ASA screen printing presses. These presses use just two (2) cylinders per head. We have eliminated 4 screen lock cylinders, 4 squeegee/flood bar cylinders and 4 squeegee/flood bar lock-in carriage cylinders per head. Less efficient pneumatic presses utilize 10-12 cylinders per head.
You’ll use a smaller compressor which means less operating costs and with the ability to run a “greener” screen printing shop.
Exclusive air-less Speed Clamps ensure a uniform hold on any frame type or thickness, saving you from the waste of melted screen clamp air hoses or leaky toggle switches.
Looking to remove air from your screen printing operation completely? Check out our VOLT Series professional-grade all-electric automatic screen printing machines.
Advanced Technology You WILL NOT find on Another Entry-Level Screen Printing Machine
The Anatol Titan ASA and ASE screen printing machines have a high-quality linear screw style servo Indexer is standard on our presses, whereas most of our competitors incorporate this feature exclusively on high-end models. Industry’s norm for entry level automatic presses is often crank arm/gear drive style or electric motor.
The superior gauged click cylinder for central off-contact control adjusts in increments of .005″ up to 2/5 inch, resulting in 80 off-contact settings – well above industry standard.
Check out our VOLT Series professional-grade all-electric automatic screen printing machines.
Standard features
Heads Up Feature
- On machines with an odd number of print heads, this trait allows you to raise the last head on a hinge, to create dedicated loading and unloading stations.
- It’s like getting two machines in one. For instance, a 10 station 9 color machine can become a 10 station 8 color machine when you need two operators to load and unload and aren’t using the last head, allowing you to work faster.
Registration
- True three-point micro-registration of the screen (front-back, left-right, rotational movement) allowing for precise and quick adjustments
- Compatible with Anatol’s ARME pre-registration system, as well as many other common pre-registration systems available on the market
Control Interface
- Aries 2 OS: same industry-leading, intuitive operating system found on our top-of-the-line VOLT presses
- 15’’ touchscreen with one-touch access to all job settings and machine functions for quick and easy setups
- Rotating boom arm allows easy access to the touchscreen from any print head
- Quick access to the operator’s manual
Functions
- Save all parameters of a stored job: indexing speed, number of strokes, flash cure time and temperature, ink colors
- Set pallet preheat temperature with smart flash
Central Off-Contact
- Gauged click mechanism allows for precise adjustments; up to 2/5 inch – 68 settings for off-contact, well above the industry standard for maximum control when printing on various substrates or using specialty inks
- Most advanced mechanical central off-contact on the market
Print Heads
- Pneumatically-driven print heads (AAA and ASA models) or A/C electric print heads (ASE models)
- Independent flood/print speed control
- Single-handed squeegee/flood bar adjustments with a range of 0° -30°
- Front and rear stroke adjustments
- Gauged squeegee/flood bar knobs provide easy depth adjustments
- Easily adjustable side screen clamps accommodate a wide range of screen sizes
Safety System
- Ensure safety during press setup and operation with our patented safety bars, located between each print head, and on each side of the load and unload stations
Skip Shirt & Smash Button
- Save time and supplies by preventing the press from printing on empty pallets with our Skip Shirt function
- Smash button allows for easy skipping of improperly loaded shirts to prevent misprints
Indexing System
- Servo indexer allows for clockwise, counterclockwise and half indexing (ASA and ASE models)
- Pneumatic indexer with clockwise direction (AAA models)
- Step-Back and Multi Step-Back programs available on models with servo indexers, and on pneumatic models in configurations of 6 stations/5 colors or smaller
Pallet System
- Slide-style pallets allow for adjustments in print location
- Tool-free locking
- Precise four-point pallet leveling system
- 16’’x 22’’ solid aluminum, low profile rubber coated pallets standard, with a wide variety of specialty and custom pallets available separately
- Laser alignment system for quick and easy pallet location and apparel substrate positioning
Options
- Quartz flash cure units
- Quick-release pallet system
- Foot pedal to control indexing
- Individual print head controls
- Special sizing available for doorways as small as 28’’
Max screen size: 21″ x 28″
Max print area: 15″ x 16″
| AAA | ASA | ASE | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Model | Air Requirement @ 90 PSI |
Power Requirement | Diameter | Air Requirement @ 90 PSI |
Power Requirement | Diameter | Air Requirement @ 90 PSI |
Power Requirement | Diameter |
| 6/4 S | 9.7 SCFM (274 l/min) |
1ph, 115 VAC, 2A |
9’4” | 7.9 SCFM (223 l/min) |
1ph, 208 VAC, 6A 3ph, 208 VAC, 4A |
9’4” | 2.0 SCFM (58 l/min) |
1ph, 208 VAC, 10A 3ph, 208 VAC, 6A |
9’4” |
| 6/5 S | 11.3 SCFM (319 l/min) |
1ph, 115 VAC, 2A |
9’4” | 9.5 SCFM (268 l/min) |
1ph, 208 VAC, 6A 3ph, 208 VAC, 4A |
9’4” | 2.2 SCFM (62 l/min) |
1ph, 208 VAC, 11A 3ph, 208 VAC, 6A |
9’4” |
| 8/6 S | 12.9 SCFM (365 l/min) |
1ph, 115 VAC, 2A |
10’2” | 11.1 SCFM (314 l/min) |
1ph, 208 VAC, 6A 3ph, 208 VAC, 4A |
10’2” | 2.4 SCFM (68 l/min) |
1ph, 208 VAC, 11A 3ph, 208 VAC, 7A |
10’2” |
| 8/7 S | 14.5 SCFM (410 l/min) |
1ph, 115 VAC, 2A |
10’2” | 12.7 SCFM (359 l/min) |
1ph, 208 VAC, 6A 3ph, 208 VAC, 4A |
10’2” | 2.5 SCFM (72 l/min) |
1ph, 208 VAC, 12A 3ph, 208 VAC, 7A |
10’2” |
| 10/8 S | 14.3 SCFM (404 l/min) |
1ph, 208 VAC, 6A 3ph, 208 VAC, 4A |
11’1” | 2.7 SCFM (76 l/min) |
1ph, 208 VAC, 14A 3ph, 208 VAC, 9A |
11’3” | |||
| 10/9 S | 15.9 SCFM (449 l/min) |
1ph, 208 VAC, 6A 3ph, 208 VAC, 4A |
11’1” | 2.8 SCFM (80 l/min) |
1ph, 208 VAC, 14A 3ph, 208 VAC, 9A |
11’3” | |||
| 12/10 S | 17.5 SCFM (495 l/min) |
1ph, 208 VAC, 6A 3ph, 208 VAC, 4A |
12’3” | 3.0 SCFM (85 l/min) |
1ph, 208 VAC, 16A 3ph, 208 VAC, 11A |
12’3” | |||
| 12/11 S | 19.1 SCFM (540 l/min) |
1ph, 208 VAC, 6A 3ph, 208 VAC, 4A |
12’3” | 3.1 SCFM (87 l/min) |
1ph, 208 VAC, 16A 3ph, 208 VAC, 11A |
12’3” | |||
Max screen size: 23″ x 33″
Max print area: 16″ x 18″
| AAA | ASA | ASE | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Model | Air Requirement @ 90 PSI |
Power Requirement | Diameter | Air Requirement @ 90 PSI |
Power Requirement | Diameter | Air Requirement @ 90 PSI |
Power Requirement | Diameter |
| 6/4 M | 9.8 SCFM (278 l/min) |
1ph, 115 VAC, 2A |
9’8” | 8.1 SCFM (223 l/min) |
1ph, 208 VAC, 6A 3ph, 208 VAC, 4A |
9’8” | 2.0 SCFM (58 l/min) |
1ph, 208 VAC, 10A 3ph, 208 VAC, 6A |
9’8” |
| 6/5 M | 11.4 SCFM (323 l/min) |
1ph, 115 VAC, 2A |
9’8” | 9.6 SCFM (272 l/min) |
1ph, 208 VAC, 6A 3ph, 208 VAC, 4A |
9’8” | 2.2 SCFM (62 l/min) |
1ph, 208 VAC, 11A 3ph, 208 VAC, 6A |
9’8” |
| 8/6 M | 13.0 SCFM (369 l/min) |
1ph, 115 VAC, 2A |
10’11” | 11.2 SCFM (318 l/min) |
1ph, 208 VAC, 6A 3ph, 208 VAC, 4A |
10’11” | 2.4 SCFM (68 l/min) |
1ph, 208 VAC, 11A 3ph, 208 VAC, 7A |
10’11” |
| 8/7 M | 14.6 SCFM (414 l/min) |
1ph, 115 VAC, 2A |
10’11” | 12.9 SCFM (364 l/min) |
1ph, 208 VAC, 6A 3ph, 208 VAC, 4A |
10’11” | 2.5 SCFM (72 l/min) |
1ph, 208 VAC, 12A 3ph, 208 VAC, 7A |
10’11” |
| 10/8 M | 14.4 SCFM (408 l/min) |
1ph, 208 VAC, 6A 3ph, 208 VAC, 4A |
12’3″ | 2.7 SCFM (76 l/min) |
1ph, 208 VAC, 14A 3ph, 208 VAC, 9A |
12’5” | |||
| 10/9 M | 16.0 SCFM (454 l/min) |
1ph, 208 VAC, 6A 3ph, 208 VAC, 4A |
12’3” | 2.8 SCFM (80 l/min) |
1ph, 208 VAC, 14A 3ph, 208 VAC, 9A |
12’5” | |||
| 12/10 M | 17.6 SCFM (498 l/min) |
1ph, 208 VAC, 6A 3ph, 208 VAC, 4A |
13’6” | 3.0 SCFM (85 l/min) |
1ph, 208 VAC, 16A 3ph, 208 VAC, 11A |
13’6” | |||
| 12/11 M | 19.2 SCFM (545 l/min) |
1ph, 208 VAC, 6A 3ph, 208 VAC, 4A |
13’6” | 3.1 SCFM (87 l/min) |
1ph, 208 VAC, 16A 3ph, 208 VAC, 11A |
13’6” | |||
Premium service that will exceed your expectations
Customer Service and Support are a way of life at Anatol Equipment. We strive to improve our service to keep your equipment running like the day you had it installed. This is our commitment to every customer. Two-year limited warranty.
Anatol Support Contacts
We are always ready to help!
847-582-1825Warranty Registration
Please complete all form fields. By submitting this form you agree to all Warranty Terms & Conditions. You must complete a form for EACH Anatol machine you wish to register.
Questions & Answers
Need help? Have Questions? Want answers?
We’ve compiled a list of commonly asked questions our customers ask most frequently. You’ll find your answers here.
